| Heavy-Duty 4-1/2" / 5" High Performance No-Lock On Paddle Switch Angle Grinder - Dewalt D28114N |
| SPECIFICATIONS Dewalt Angle Grinder D2811N Amps 13.0 Amps Max Watts Out 1,700 W No Load Speed 11,000 rpm Use Wheels RPM Above 12,000 rpm Spindle Lock Yes Spindle Thread 5/8"-11 Tool Length 13 " Tool Weight 4.6 lbs INCLUDES Dewalt Angle Grinder D28114N two position side handle depressed center wheel keyless adjustable guard wrench |
| FEATURES Dewalt Angle Grinder D28114N 13.0 Amp / 2.3HP, 11,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection No-Lock On paddle switch prevents the user from locking the grinder on Dust Ejection System(TM) provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents Quick-Change Wheel Release provides tool free wheel removal Complete Electronic Control(TM) provides multiple advanced technology features such as E-Clutch(TM), Power-Off(TM) and Power-Loss Reset(TM) Dual Abrasion Protection provides increased motor protection from damaging dust and debris ingestion One piece brush arm prevents brush hang-up due to dust ingestion E-Clutch(TM) shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor Power-Off(TM) Overload Protection shuts the tool off before it reaches overload or burn-up Power-Loss Reset(TM) prevents accidental re-starts following a power disruption when the tool is left in the "on" position Vibration reducing two position side handle provides user comfort and reduces user felt vibration Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage Keyless adjustable guard provides tool free guard adjustments increasing productivity |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| The D28114N grinder is equipped with a patent pending CEC - Complete Electronic Control system to provide increased durability for end users. The CEC system includes E-Clutch, an electronic clutch mechanism that detects a pinch or bind-up situation and shuts the motor off immediately to reduce the risk of burn-up. It also reduces the risk of kickback during operation. The D28114N includes dual abrasion protection in the motor, which features an epoxy coated field that protects the copper in the motor and an armature debris deflector that deflects dust and debris away from the motor. The patent pending Dust Ejection System increases durability of the grinders by ejecting debris that enter the tool through the air-intake vents, reducing the occurrence of debris damaging the motor. In order to increase power without significantly increasing tool girth, DEWALT built this line of high-performance grinders with a patent pending 4-piece G55 motor. This innovative motor design allows for 50 percent more copper than standard motors by employing next generation coil winding processes, making the grinders among the smallest in their class while still offering the most power. The D28114N has a 13 amp, 2.3 max motor HP motor and has been designed to deliver nearly 30 percent more power than the previous models. For increased ease-of-use, the D28114 can accommodate both 4 ½" and 5" guards and wheels and are each equipped with a 5" Type 27 guard and 5" Type 27 wheel. Additionally, each high performance grinder was designed with a Quick-Change wheel release system that allows users to remove wheels without a wrench. The D28114N is equipped with a paddle switch. |
| DEWALT Power Tools Online |
| Heavy-Duty 4-1/2" / 5" High Performance No-Lock On Paddle Switch Angle Grinder - Dewalt D28114N |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |