| Heavy-Duty XRP 12V / 14.4V Cordless 1-1/4" - 2-1/2" 16 Gauge Straight Finish Nailer Kit - DC612KA |
| FEATURES Dewalt 16 Gauge Cordless Straight Finish Nailer DC612KA The tool works as fast as you do with consistent nail penetration into both soft and hard joints. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed. Headlights provide increased visibility in low-light conditions or confined areas without any light. Depths can be easily referenced utilizing numbered dial and user does not sacrifice performance when changing depths in hard wood joints. User can engage contact trip lock-off and prevent accidental dis-charge of fastener. Provides increased durability over current cordless nailers and provides easy access for troubleshooting and service on the job-site or by a service technician. Provides easy access to the nosepiece for the simple removal of a jammed fastener without the use of screwdrivers or tool wrenches. More nails per charge and maximum number of recharges without memory effect. Provides increased portability and versatility on the job-site. Increased visibility and durability along with protection for work-surface from the contact-trip. Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed. Integrated LED lights for long life and durability Contact Trip Lock-Off disables the trigger when not in use and is easy to engage/dis-engage Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches. Top cap is impact resistant and easy to remove for troubleshooting Part of the XRP DEWALT Cordless system Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints. Will accept most brands of 16Ga. straight nails |
| SPECIFICATIONS Dewalt 16 Gauge Cordless Straight Finish Nailer DC612KA Voltage 12V/14.4V V Nailer Operating Mode selective Nailing rate 4-5 nails/sec Nail Diameter 16 - gauge gauge Magazine Angle straight degrees Nail Length Capacity 1-1/4" - 2-1/2" " Magazine Capacity up to 110 nails Magazine Loading rear - load Integrated Belt Hook yes Jam Clearing yes Tool Height 12.75 " Tool Length 12.5 " Tool Weight 7.8 lbs Tool Width 4.18 " INCLUDES Dewalt 16 Gauge cordless Straight Finish Nailer DC612KA 1 hour charger (2) 14.4V XRP batteries reversible belt hook no-mar tip DEWALT safety glasses heavy-duty kit box |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| The DeWalt DC612KA Finish Nailer is powered by DeWalt XRP battery system. The Heavy-Duty 16 Gauge 1-1/4 inch to 2-1/2 inch Cordless Finish Nailers provide the speed, durability and power that the user has only come to expect from pneumatic tools. DeWalt offers the nailer in both straight and 20 angled magazine configurations which accept both standard 16-gauge finish nails along with DeWalt and Paslode 20 angled nails. DeWalt offers the tool in both multi-volt (which accept 12V/14.4V battery packs) and 18V platforms. The key application solution that the DeWalt 16-gauge finish nailer provides the end user is the readiness to fire and consistency of nail penetration that no other cordless solution has been able to deliver in the past." |
| DEWALT Power Tools Online |
| Heavy-Duty XRP 12V / 14.4V Cordless 1-1/4" - 2-1/2" 16 Gauge Straight Finish Nailer Kit - DC612KA |
 |
 |
 |
 |
 |
 |