| FEATURES Dewalt Compressor D55273 10.3 SCFM delivered @ 100 PSI and 150 Max PSI allows compressor to support additional nail guns Twin cylinder, cast iron, oil lubricated pump with Emglo's 50 years of proven durability Forced air cooling allows the pump to run cooler and more efficiently Low oil shut off (patent pending) provides greater pump protection 5.5 HP Honda OHV GX gas engine provides proven reliability and durability Roll cage design protects critical compressor components and allows compressor to excel in harsh jobsite conditions One-hand push/pull handle and two 12" non-flat tires provide greater mobility around the jobsite Low oil shut off provides greater engine protection Ball valve drain allows for quick and thorough tank draining On-board belt tensioning device allows for quick and easy belt adjustments Automatic idle control for reduced fuel consumption SPECIFICATIONS Dewalt Compressor D55273 Drive Belt Horsepower 5.5 HP Tank Size 10.5 gal Power Supply Gas CFM @100 PSI 10.3 CFM Pump Speed 1025 rpm Tool Length 50 " Tool Height 22.30 " Tool Width 24.2 " Tool Weight 185 lbs Shipping Weight 210 lbs |
| Heavy-Duty, 5.5 HP, 10.5 Gallon, 150 PSI Gas Wheeled Portable w/ Roll Cage - Dewalt D55273 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| This new compressor is a powerhouse of features all developed to provide end users with increased levels of performance, durability and ease of use. Performance - The Dewalt D55273 has an all new, long life cast iron oil lube pump that produces 10.3 SCFM at 100 PSI, and a large 10.5-gallon tank with 150 Max PSI tank pressure, increasing surge air supply. This high air delivery and increased surge supply provides users with the ability to add two additional framing nailers or one additional roofing nailer, allowing contractors to operate a total of seven framing nailers or three roofing nailers from a single compressor at the same time. Durability/Reliability - To guarantee the durability of the D55273, DEWALT designed an innovative roll cage – a full-frame design that protects all components from jobsite abuse. The pump is also designed with patent pending low oil shut-off to prevent the pump from continuing to operate without a sufficient amount of oil. Another unique feature is the forced air pump cooling system, where a fan on the engine pulley and ducted belt guard directs 150 CFM over the head of the pump, allowing the pump to operate up to 100 degrees cooler than competitive units. This maximizes the quality and life of the compressor. Mobility/Ease of Use - DEWALT equipped the D55273 with a one-hand push/pull handle and two 12” non-flat, semi pneumatic tires giving the user an enhanced 3.6” ground clearance and the ability to easily navigate any rugged jobsite terrain. For quick belt adjustments DEWALT designed the D55273 with an on-board belt tensioner for the pump and located the ball drain valve 8” off the ground for quick tank draining without splashing. |
| DEWALT Power Tools Online |
| Heavy-Duty, 5.5 HP, 10.5 Gallon, 150 PSI Gas Wheeled Portable w/ Roll Cage - Dewalt D55273 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |