| FEATURES Dewalt Compressor D55154 4.0 CFM delivered at 90 PSI pump provides rapid recovery Oil lubricated pump improves durability Cast iron cyliner enhances pump life 10" pneumatic wheel and handle kit for ease of mobility Top load panel with positioning holes allows unit to transport loads up to 100 lbs High-flow regulator for increased performance Run multiple tools from dual universal quick couplers Ball valve drain allows for quick and thorough tank draining Convenient cord wrap for easy storage Dual soft start valves assist in cold weather start up SPECIFICATIONS Dewalt Compressor D55154 Horsepower 1.1 Continuous HP Drive Direct Tank Size 4 gal Power Supply 120V AC, 15 amps, 60 Hz, 2 pole induction motor CFM @100 PSI 3.8 CFM Pump Speed 3,400 rpm Tool Length 22.0 " Tool Width 18.5 " Tool Height 23.0 " Tool Weight 87 lbs Shipping Weight 95 lbs INCLUDES Dewalt Compressor D55154 DEWALT compressor oil control panel with (2) universal quick couplers |
| Heavy-Duty 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel - Dewalt D55154 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| The DeWalt D55154 is a Heavy-Duty 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel. The oil lubricated pump improves durability and 4.0 CFM delivered at 90 PSI pump provides rapid recovery. The cast iron cylinder enhances pump life. It is ideal for at least a four-person finish woodworking crew; carpenters can use the D55154 to complete production interior and exterior trim applications, as well as light framing and roofing applications. The heavy-duty reinforced frame allows the compressor to withstand the harshest jobsite conditions. The full-protection roll cage frame is designed to prevent accidental damage to the pump and motor. Its couplers and gauges are well guarded by the tank assembly, protecting these important components from routine wear and tear. It is designed to meet end users needs and provide mobility on the jobsite. Measuring just 18-1/2" wide and 23" high, with a 2.5 frame clearance and 10 solid-axles, fully pneumatic tires, the compressor can be easily transported on jobsite terrain. The D55154 features an ergonomic telescoping handle and also includes a transport platform or dolly, on top of the deck, allowing users to tie down additional equipment to the top of the compressor and easily move it to various locations. For increased efficiency, the oil pump has been rotated 90º, providing easy access to check and change the oil, as well as a ball drain valve for quick and thorough tank draining. DEWALT designed its first oil-lubricated, wheeled compressor to provide end users with increased durability, ease-of-use, and performance. Ideal for at least a four-person finish woodworking crew, carpenters can use the D55154 to complete production interior and exterior trim applications, as well as light framing and roofing applications. Durability-The heavy-duty reinforced frame allows the compressor to withstand the harshest jobsite conditions. The full-protection roll cage frame is designed to prevent accidental damage to the pump and motor. The couplers and gauges are well guarded by the tank assembly, protecting these important components from routine wear and tear. In addition, the D55154 was built with a rugged 3/4 foot, which is less susceptible to being broken and knocked off the unit, compared to other compressors on the market. Ease of Use/Mobility - designed to meet end users needs and provide mobility on the jobsite. Measuring just 18 1/2 wide and 29 high, with a 2.5 frame clearance and 10 solid-axle, fully pneumatic tires, the compressor can be easily transported on jobsite terrain. The D55154 features an ergonomic telescoping handle and also includes a transport platform, or dolly, on top of the deck, allowing users to tie down additional equipment to the top of the compressor and easily move it to various locations. For increased efficiency, the oil pump has been rotated 90 degrees, providing easy access to check and change the oil, as well as a ball drain valve for quick and thorough tank draining. Performance- For high surge performance, the D55154 produces 4.0 SCFM at 90 PSI, 125 PSI Max. This is designed with a 1.1 (running) HP induction motor for long-life operation |
| DEWALT Power Tools Online |
| Heavy-Duty 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel - Dewalt D55154 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |