| FEATURES Dewalt Compressor D55141 2.0 SCFM delivered @ 90 PSI pump, 2.0 gallon tank and 150 max PSI enables more nails to be fired and provides quicker recovery Durable oil free pump provides extended maintenance-free operation Low 79* dBA allows for quieter operation (*Tested per ISO3744) Roll cage and control panel provide protection to key compressor components Low 10 amp draw motor provides easy start-up and reduces breaker tripping Lightweight (30 lbs), thin (10.5") and compact design is easy to carry and store Ball valve drain allows for quick and thorough tank draining Dual quick couplers to easily support 2 nailers Convenient cord wrap for easy storage High-flow regulator for increased performance SPECIFICATIONS Dewalt Compressor D55141 Horsepower 0.6 continuous HP Drive Belt Tank Size 2.0 gal Power Supply 120V, 60Hz, 10 amps., universal motor. CFM @100 PSI 1.8 CFM Pump Speed 2,200 rpm Tool Length 21.25 " Tool Width 19.0 " Tool Height 10.5 " Tool Weight 30 lbs Shipping Weight 35 lbs |
| Heavy-Duty 2 Gallon, 150 PSI Max, Trim Compressor - Dewalt D55141 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| This new Dewalt compressor is designed to offer end users increased performance, quiet operation, and a lightweight, compact design. DEWALT designed the D55141 trim compressor to handle up to two finish nailers. Finish woodworkers and carpenters can use the D55141 to complete custom and exterior trim, while other tradesmen will find it useful in a number of non-trim applications. Performance – For increased performance, the compressor produces 2.0 SCFM at 90 PSI, 150 PSI Max, and provides users with a low noise operation at 79 dBA. The D55141 is also equipped with an oil-free pump, allowing for maintenance- free operation. This long-life pump delivers surge performance with quick recovery, and the oil-free design also increases productivity by eliminating the need for users to check or refill the pump. Additionally, the oil- free pump helps to keep the jobsite clean, preventing oil from transferring to work surfaces. The compressor was designed with a 10 amp draw motor to deliver easy start-up and reduced breaker tripping. The motor is also equipped with a high flow regulator that delivers maximum air pressure, increasing performance on the jobsite. Ease of Use/Portability - The D55141 weighs only 30 pounds and features a thin (10.5”), compact design, enabling users to easily transport and store the compressor. For increased efficiency, DEWALT equipped the D55141 with easy-to-use dual, quick couplers, allowing multiple nailer operations at the same time. The compressor also features a ball drain valve for quick and thorough tank draining and a convenient cord wrap for quick, easy storage. Durability - DEWALT built the D55141 with an innovative roll cage, full-protection frame design to shield the unit from accidental damage and routine wear and tear. The wrap-around control panel that covers the frame also provides further protection to key components of the compressor. This compact and unique design provides maximum durability and longevity. |
| The DeWalt D55141 is a Heavy-Duty 2 Gallon, 150 PSI Max Trim Compressor. The durable oil free pump provides extended maintenance-free operation and low 79 dBA allows for quieter operation. Finish woodworkers and carpenters can use the D55141 to complete custom and exterior trim, while other tradesmen will find it useful in a number of non-trim applications. For increased performance, the compressor produces 2.0 SCFM at 90 PSI, 150 PSI Max and provides users with a low noise operation at 79 dBA. It is also equipped with an oil-free pump, allowing for maintenance-free operation. The long-life pump delivers surge performance with quick recovery and the oil-free design also increases productivity by eliminating the need for users to check or refill the pump. Additionally, the oil-free pump helps to keep the jobsite clean, preventing oil from transferring to work surfaces. The motor is also equipped with a high flow regulator that delivers maximum air pressure, increasing performance on the jobsite. For increased efficiency it is equipped with the easy-to-use dual, quick couplers, allowing multiple nailer operations at the same time. The compressor also features a ball drain valve for quick and thorough tank draining and a convenient cord wrap for quick, easy storage. It is built with an innovative roll cage, full-protection frame design to shield the unit from accidental damage and routine wear and tear. The wrap-around control panel that covers the frame also provides further protection to key components of the compressor. |
| DEWALT Power Tools Online |
| Heavy-Duty 2 Gallon, 150 PSI Max, Trim Compressor - Dewalt D55141 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |